Ultra-high Speed and High Accuracy, Key Switch Type Digital Resistance Checker

Data sheet(PDF)-----
Optimum for the on a sorting machine, taping machine and painting conveyor for chip. MELF(metal electrode face bonding) and lead type resistor of D,F,G,J,K and M class.
		●This device is correspond to the minimum chip. 　 (Low measurement force) ●Ultra-high speed:0.7 msec.[TYP] ●High accuracy and high stability by the measuring 　 method rejected thermoelectromotive force. ●High stability by the improvement of noise immunity for 　 the isolated curcuit between analog part and digital part. ●Available to make the ultra-high speed and high stable 　 measurement　 by the setting function of average time 　 on measuring value for each range. ●Range of measurement for absolute value: 　 0.00mΩ〜200.00MΩ for %:5mΩ〜109MΩ[±99.99%] ●Available to select the function for contact check before 　 or after the measurement, or function of non-contact check. ●RS-232C and Centronics interface are built-in as standard 　 equipment.[GP-IB is option] ●Transfer function of Setting data is built-in 　 as standard equipment.(Available to transfer the 　 same setting data to another set of AX-162D) ●The checking circuit of the abnormal measuring current 　and voltage is built-in.

■SPECIFICATIONS■

Measuring range and Accuracy (at23℃±5℃)

Measuring range	Test Current	Accuracy
		SLOW	*FAST
5mΩ〜100mΩ	100mA	within ±0.02%±α±2d	within ±0.03%±2α±3d±[2/(1+n)]d
100.1mΩ〜1Ω	100mA	within ±0.02%±α±1d	within ±0.02%±α±2d±[2/(1+n)]d
1.001Ω〜10Ω	50mA
10.01Ω〜100Ω	10mA	within ±0.02%±1d	within ±0.02%±2d±[1/(1+n)]d
100.1Ω〜1kΩ	5mA
1.001kΩ〜10kΩ	0.5mA
10.01kΩ〜100kΩ	50μA
100.1kΩ〜1MΩ	5μA		within ±0.05%±2d±[1/(1+n)]d
1.001MΩ〜10MΩ	0.5μA	within ±0.03%±1d	within ±0.2%±4d±[1/(1+n)]d
10.01MΩ〜109MΩ	0.05μA	within ±0.1%±2d	------------

d:digits 　n:Averaging time(msec), α=[100/setting value (mΩ)]×0.01%, In case of the measurement of absolute value, add ±1digit. *The above FAST is accuracy under the condition shielded completely.

Measuring time	Remote start Free running SLOW FAST SLOW FAST about 18 msec.〜 400msec. about 0.7msec.〜400msec. about 30〜2times/sec. about 60〜2times/sec.
EOC[End of comparison] pulse width	1〜250msec. or continuative
Measuring method	2 or 4-terminal measurement
Comparator set range	4 1/2 digit(20000) both for high and low limit % range : ±99.99%
Operation condition	[Temp.] +0℃〜+50℃　　[Humidity] below 80%
Power supply	AC85V〜256V, 50/60Hz, below 50VA
Outer dimension	333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc.)
Weight	about 3.5kg

■OPTION■

GP-IB Interface/Solenoid power source DC24V 1A